All controllers come with these basic features:

bullet5V only operation
bullet 2 RS-232 serial ports
bullet On card EPROM programmer
bullet Digital I/O (amount varies with each card)
bullet Basic Language or C Programmable
bullet Programmable using a PC

Check out the Quick Control Card Selection Guide


  Low power, small size
  RPC-210
bulletCompact 2.80" x 6.20" size
bullet15 uA standby current
bullet8 Channel, 12 Bit A/D
bullet28 Digital I/O lines
bullet2 Analog outputs
bullet512K Battery backed RAM/Real Time Clock
bulletDisplay/Keypad port
bulletCounter/quadrature encoder input

 
  Counter/encoder, analog input
  RPC-320
bullet8 Analog inputs with gain
bullet5 mw Low power mode
bulletKeypad and display ports
bullet1 MB memory
bullet33 Digital I/O lines
bulletHigh speed counter/encoder input       

 Palm sized, low cost, low power
  RPC-220
bulletCompact 2.85" x 3.85" size
bullet8 Channel,10 Bit A/D
bulletLow power modes
bullet19 Digital I/O lines
bulletPWM, analog out
bullet512K Battery Backed RAM
bulletReal time clock

 
  Counter/encoder, analog I/O
  RPC-330
bullet34 Digital I/O lines
bulletCPU watchdog timer
bullet1MB memory
bullet8 Analog inputs with gain, 12 bit resolution
bullet2 Analog outputs, 12 bit resolution
bulletHigh speed counter/encoder inputs       

 Analog, digital I/O, graphic display
  RPC-2350
bullet1/4 VGA display port
bullet8 Channel, 12 Bit A/D
bullet2 Channel, 12 Bit D/A or 4-20 mA output
bullet49 Digital I/O lines
bulletBattery backed RAM and real time clock
bullet1 MB memory
bullet2 RS-232/485 port

 
  47 Digital I/O, 2 serial, low cost
  RPC-150
bullet47 Digital I/O lines
bullet16-Key keypad interface
bullet48 Digital I/O lines
bullet2 RS-232 serial ports
bullet800 Line flash EPROM storage
bullet5V only operation

      


 Fast Controller with Analog & Digital I/O
  RPC-400
bullet20 MHz RISC controller
bullet12-16 Bit A-D, D-A
bulletDigital I/O
bulletKeypad, display, and expansion ports
bulletPrograms can be modified in field or by modem
bulletProgram in C

 
  Controller w/ opto rack, Cambasic
  RPC-30
bullet4 Position opto rack
bullet24 Digital I/O lines
bulletLCD display & keypad ports
bulletReal time clock
bulletBattery backed-up RAM
bulletThe fastest RPC card available     

  Controller w/ opto rack, BASIC-52
  RPC-52
bulletEnd of life - not for new design
bullet24 Digital I/O lines
bullet8 Analog inputs and 2 PWM output
bulletLCD display and keypad ports
bulletReal time clock
bulletBattery backed-up RAM 
  C programming adaptor
  RP-10
bulletUse with RPC-320, RPC-330
bulletRun C or Assembly programs
bulletSave program to flash programmer
bulletIncludes monitor ROM, drivers    
   Atmel Chip 29C040A Replacement
  Chip-1
 
bulletReplacement for Atmel
bulletAT29C040A in Dip format
      Custom solutions
  
   

Call to discuss custom solutions!!  

       303-750-8587



 

[Home] [Controllers] [Customers] [Downloads] [Accessories] [Price/Ordering] [Your Privacy]

 Remote Processing Corporation
  7975-B East Harvard Avenue, Denver, CO 80231 
 
 Phone 303-750-8587
 Fax 303-690-1875