Remote Processing | Single Board Computers > Large selection, Small, Low Power

Manufacturers of Industrial Embedded Single-Board Computers for worldwide applications
Specializing in Custom Design - Offering a large selection of Single-Board Computers

Embedded Single-Board Computers

Basic Features:

-- low power

--2 RS-232 serial ports

--On board EPROM programmer

--Digital I/O (amount varies with each card)

--Basic Language or C Programmable

--Programmable using a PC

Check out the Quick Control Card Selection Guide

Modbus compatible

Mo CX-10 compatible

Picture of the CX-10 Single-Board Computer with Wireless Modbus

	8 relays and opto inputs
	8-30V DC power in
	12V battery charger
	2 RS-232/485 serial ports
	RF modem
	Basic operating system
	LED indicators
	2 Flow measurement pulse counters

Low power, small size

RPC-210

	Compact 2.80" x 6.20" size
	15 uA standby current
	8 Channel, 12 Bit A/D
	28 Digital I/O lines
	2 Analog outputs
	512K Battery backed RAM/Real Time Clock
	Display/Keypad port
	Counter/quadrature encoder input

Palm sized, low cost, low power

RPC-220

	Compact 2.85" x 3.85" size
	8 Channel,10 Bit A/D
	Low power modes
	19 Digital I/O lines
	PWM, analog out
	512K Battery Backed RAM
	Real time clock

Counter/encoder, analog input

RPC-320

	8 Analog inputs with gain
	5 mw Low power mode
	Keypad and display ports
	1 MB memory
	33 Digital I/O lines
	High speed counter/encoder input
	Real time clock

Analog, digital I/O, graphic display

RPC-2350

	1/4 VGA display port
	8 Channel, 12 Bit A/D
	2 Channel, 12 Bit D/A or 4-20 mA output
	49 Digital I/O lines
	Battery backed RAM and real time clock
	1 MB memory
	2 RS-232/485 port

Counter/encoder, analog I/O

RPC-330

	34 Digital I/O lines
	CPU watchdog timer
	1MB memory
	8 Analog inputs with gain, 12 bit resolution
	2 Analog outputs, 12 bit resolution
	High speed counter/encoder inputs

47 Digital I/O, 2 serial, low cost

RPC-150

	47 Digital I/O lines
	16-Key keypad interface
	2 RS-232 serial ports
	800 Line flash EPROM storage
	5V only operation

Fast Controller with Analog & Digital I/O

RPC-400

	20 MHz RISC controller
	12-16 Bit A-D, D-A
	Digital I/O
	Keypad, display, and expansion ports
	Programs can be modified in field or by modem
	Program in C

Controller w/ opto rack, BASIC-52

RPC-52

	End of life - not for new design
	24 Digital I/O lines
	8 Analog inputs and 2 PWM output
	LCD display and keypad ports
	Real time clock
	Battery backed-up RAM

Controller w/ opto rack, Cambasic

RPC-30

	4 Position opto rack
	24 Digital I/O lines
	LCD display & keypad ports
	Real time clock
	Battery backed-up RAM
	The fastest RPC card available

C programming adaptor

RP-10

	Use with RPC-320, RPC-330
	Run C or Assembly programs
	Save program to flash programmer
	Includes monitor ROM, drivers

Atmel Chip 29C040A Replacement

Chip-1

	Replacement for Atmel
	AT29C040A in Dip format

Remote Processing Corporation
7975-B East Harvard Avenue, Denver, CO 80231

Phone 303-750-8587
Fax 303-690-1875